Italian Manufacturer of road safety products
Sisas is a leader in the signage and highway safety industry, able to provide an adequate response to the needs for safety and monitoring. Our priority is the safety of road users, be them vehicles or pedestrians. Sisas design every product following this precise logic, while conforming to the most stringent construction standards and the strictest ethical codes.
The company offers a wide range of products ranging from signage, to systems for monitoring traffic and mobility.
The company offers a wide range of products ranging from signage, to systems for monitoring traffic and mobility.
New products
Products
show more >>
5 CM RUBBER SPEED MODERATOR (h5x90x50 CM)
The device is mounted on streets where the speed limit is 40 km/h. It can be installed in all the places where you want to keep a moderate speed.
Modular, elastic and resistant to the crushing, the yellow inserts guarantee high night visibility.
Modular, elastic and resistant to the crushing, the yellow inserts guarantee high night visibility.
TRAFFIC LIGHT QM09 CONTROL UNIT
The new QM09 Control Unit provides some new applications and advantages.
- It's possible to connect a modem to receive messages or change time settings via SMS alarm. - It's possible to work with led or incandescent bulbs traffic lights with cables with 2 or 3 units. - It's possible to connect a radar so to read the traffic flow and adeguate the time setting according to it. - There is not Master and Slave. - Availability of a button to add different phases.
- It's possible to connect a modem to receive messages or change time settings via SMS alarm. - It's possible to work with led or incandescent bulbs traffic lights with cables with 2 or 3 units. - It's possible to connect a radar so to read the traffic flow and adeguate the time setting according to it. - There is not Master and Slave. - Availability of a button to add different phases.
LED OPTIC DIAMETER 200 MM "NEW!"
The optic is made of LED technology with Fresnel lens, in order to have better optical performance with the minimum consumption. The optic is Certified with EN 12352 Class L8H.
The protection grade from the weathering is IP 67/68.
The optic is made of LED technology with Fresnel lens, in order to have better optical performance with the minimum consumption. The optic is Certified with EN 12352 Class L8H.
The protection grade from the weathering is IP 67/68.
DTS 600
The DTS 600 is an advanced system based on Doppler radar technology able to relieve and show, in a numerical display, the speed of the approaching vehicles. The sensor, integrated into the container, is made by doppler radar working at frequency of 24.125GHz and a microcontroller board, which shall show the speed by the display.
ROAD MIRROR "TIZIANO" 60 CM
The circular mirrors are made of plastic materials treated to ensure high impact resistance, weathering, UV rays and dust. They have a back body made of orange polipoprilene and a convex reflecting surface at the front (to extend the field of view) made of aluminized acrylic.The mirror at the back, has a galvanized steel bracket for fastening onto poles and/or supports.
SPEED CUSHIONS
The device is mounted on streets where the speed limit is 30 km/h and it is installed in order to slow down only some categories of vehicles such as cars. In the same time the device is not effective for other type of vehicles such as bus, ambulances.
RUBBER CAR STOP
It delimits parking area and parkings, protecting walls and vehicles from the hurts.Resistant to the hurts, to the weathering, it has a good visibility during the night because of the yellow inserts. It does not damage the vehicles.
75 CM RUBBER CONE
They are used to show working zones in highway during the day and as a base for the sequential flashing light. High elasticity, resistant to the crushing, anti-aging painting, the application of two bands, increase the visibility. Available with Engineer Grade tape, High Intensity Grade tape and Fully Reflective High Intensity Grade tape.
Barrier with 5 Led Optics
Mainly used for applications on emergency vehicles or on working machines, its purpose is to catch the driver attention for a dangerous situations, a lane deviation or changing.
Handled by the driver with a remote control. Possibility to choose different configurations of the high brightness LED lenses, depending on the operator needs. Easy to install or to remove on any kind of vehicle.
Handled by the driver with a remote control. Possibility to choose different configurations of the high brightness LED lenses, depending on the operator needs. Easy to install or to remove on any kind of vehicle.
STACKING NEW JERSEY
Modular element that permit to create: continuing barriers for traffic, delimitations of working zones, for dangerous zones, and private areas. The product can be stacked and so there is a big reduction of cost of transport and warehouse space, UV resistant, hurt resistant, quick and easy filling, space for road signs and lamps.
8 LIGHTS DIRECTIONAL PANEL
100MM - 60X60CM OR 200MM - 90X90CM
100MM - 60X60CM OR 200MM - 90X90CM
Directional LED panel with 8 LEDs lights is made of black painted aluminum; the case is composed by a back side part where are located the brackets and a front side part where the LED lights are applied. The two parts are fixed together with screw rivets, inside are located the electronic board for the flashing mode.
13 LIGHTS DIRECTIONAL PANEL
100MM - 70X70CM OR 200MM - 105X105CM
100MM - 70X70CM OR 200MM - 105X105CM
Directional led panel with 13 LEDs lights is made of black painted aluminum; the case is composed by a black side part where are located the brackets (simple reinforcement) and a front side part where the LED lights, made of transparent lexan, are applied. The two parts are fixed together with screw rivets and inside are located the electronic board for the flashing mode.
ROAD FLAG MOVER
The SIGN FLAG 11 is made of a foldable trailer completed with foldable reflective double sides reflective sign with one luminous led optic applied on the top. The flag mover is
located in working vertical position with 2 locking handles;in the back position there is the motor for the movement of the sign flag. The flag mover has been studied to make
configurations for deviations on the right or on the left. The device can work with 1 battery at 12V located in the back battery box.
located in working vertical position with 2 locking handles;in the back position there is the motor for the movement of the sign flag. The flag mover has been studied to make
configurations for deviations on the right or on the left. The device can work with 1 battery at 12V located in the back battery box.
WARNING TRAILER - FIG.401 750 KG
The fig 401 unit is able to handle 23 lenses of 200 mm, and 2 of 300 mm, in order to generate high visibility effects. This unit has been developed for being used on mobile signs, such as on safety means and on mobile trailers. The unit handle all the lenses independently in order to guarantee the individual function of the flashing lights. Besides, the control system handle the battery level, visible through a luminous light, and the brightness control of the lenses that is automatically regulated.
PEDESTRIAN SAVE
Pedestrian Saves is a system which is employed in the road field, which allows
to detect the presence of a pedestrian who is going to cross the roads in proximity to the pedestrian crossing, so that the motorist can be advised through the activated display lights in both driving directions. Pedestrian Saves consists principally of two road panels on both road sides and each one is turned in the direction from where the driver arrives.
to detect the presence of a pedestrian who is going to cross the roads in proximity to the pedestrian crossing, so that the motorist can be advised through the activated display lights in both driving directions. Pedestrian Saves consists principally of two road panels on both road sides and each one is turned in the direction from where the driver arrives.
COMPACT 1000 JR
Compact 1000 is an innovative portable Radar-based instrument for monitoring and classifying motor vehicle traffic without impinging on the roadway at all. Its small size and the fact that it can be positioned beside the road on any sort of existing support (sign posts, lighting poles,
etc.) make this product easy to install without in any way blocking traffic and without endangering the personnel assigned to monitor traffic.
etc.) make this product easy to install without in any way blocking traffic and without endangering the personnel assigned to monitor traffic.
PEDESTRIAN LIGHT
The optic can be applied on signs to signal pedestrian crossings area, also in combination with our pedestrian crossing with sensor. It can be also applied with the orange case to be fixed on poles to advise the driver
about the eventual presence of pedestrian.
about the eventual presence of pedestrian.
RADAR GJ01
The GJ01radar is a system based on doppler effect able to detect vehicles at great distances, with two different modes: tracking and counting.In the tracking modalities is possible to detect vehicles from long distances. The software allows the system to reach the speed of a vehicle until this is inside the radar beam area. The system must be installed at an angle of measure close to 0° (in relation to the road axis).
ONE WAY
This system has been developed in order to relieve and show streets in the wrong direction. The kit is composed by a radar sensor for detecting vehicles, coming in the wrong way. The sensor is also easy to install. The sign has two or four flashing lights that have the purpose to warn the driver if is driving in wrong way. In particular cases is possible to install an high-powered siren, for the acustic warning.
ICE 500
Ice sensor with temperature and humidity memory data. The system surveys the ice presence and makes a statistic analysis of the temperature and humidity, with data memory for statistics.
DTS MEDIA SYSTEM
The DTS media system is an advanced system based on the DTS500. This device keeps the heart of DTS500, replacing the display device, which passes by a 3-digit numeric display, an alphanumeric display up to 30 characters. Thanks to the presence of Doppler radar, which handles events related to the speed and vehicle count, coupled with the ability to store many messages and the internal clock, DTS Media System provides an efficient use of the alphanumeric display.
DTS DELUXE
The DTS 500 B is an advanced system based on Doppler radar technology able to relieve and show, in a numerical display, the speed of the approaching vehicles. The sensor, integrated into the container, is made by doppler radar working at frequency of 24.125GHz and a microcontroller board, which shall show the speed by the display.
30 CM PLASTIC CONE
They are used to delimit and to show maintenance and working zones, in private areas and parking. Resistant to the hurts of the passing vehicles, easily handling during the installation and removal thanks to the grip on the top of the cone.
5 CM RUBBER SPEED MODERATOR (h5x50x50 CM)
The device can be installed in all the places where you want to keep a moderate speed. Modular, elastic and resistant to the crushing, the yellow inserts guarantee high night visibility.
7 CM RUBBER SPEED MODERATOR (h7x120x50 CM)
The device is mounted on streets where the speed limit is 30 km/h. It can be installed in all the places where you want to keep a moderate speed.
Modular, elastic and resistant to the crushing, the yellow inserts guarantee high night visibility.
Modular, elastic and resistant to the crushing, the yellow inserts guarantee high night visibility.
30 CM RUBBER CONE
They are used to show working zones in parking and private areas.
High elasticity, resistant to the crushing, anti-aging painting, the application of two bands increase the visibility.
Available with Engineer Grade tape, High Intensity Grade tape and Fully Reflective High Intensity Grade tape
High elasticity, resistant to the crushing, anti-aging painting, the application of two bands increase the visibility.
Available with Engineer Grade tape, High Intensity Grade tape and Fully Reflective High Intensity Grade tape
RUBBER CONE 50 CM
They are used to show working zones in highway during the day and as a base for the sequential flashing light. High elasticity, resistant to the crushing, anti-aging painting, the application of two bands increase the visibility. Available with Engineer Grade tape, High Intensity Grade tape and Fully Reflective High Intensity Grade tape.
RUBBER EVERFLEX 30 CM
The SISAS Rubber Everflex delineator is made from a highly elastic, vulcanized rubber, extremely resistant to vehicle impact; and due to its construction, if impacted, will
return to a vertical position without breaking off from the ground. The SISAS Everflex delineator, which has a cylindrical shape, is coated with a durable, weather resistant paint, to which alternating reflective white bands have been applied to increase visibility.
return to a vertical position without breaking off from the ground. The SISAS Everflex delineator, which has a cylindrical shape, is coated with a durable, weather resistant paint, to which alternating reflective white bands have been applied to increase visibility.
RUBBER EVERFLEX 60 CM
The SISAS Rubber Everflex delineator is made from a highly elastic, vulcanized rubber, extremely resistant to vehicle impact; and due to its construction, if impacted, will return to a vertical position without breaking off from the ground. The SISAS Everflex delineator, which has a cylindrical shape, is coated with a durable, weather resistant paint, to which alternating reflective white bands have been applied to increase visibility.
RUBBER DEFELECO 6 INSERTS
The delineator is made of profiled vulcanized rubber with high elasticity , high resistance to the hurts and crushing of the vehicles. The used material permits the delineator to return in the vertical position if hurt from a vehicle, without breaking off from the ground. The delineator has a trapezium shape that is painted with paints that reduces the ageing and increases the weather resistance. On the delineator are applied 6 reflective inserts class I or class II in order to obtain a better visibility.
H 3 CM RUBBER PEDESTRIAN CROSSING
The pedestrian crossing is made of vulcanize rubber and it is composed of movable modular parts. The product is resistant to the hurts and crushing of the vehicles. On the edge from the side of the vehicles, the pedestrian crossing has elastoplastic yellow inserts. In the central part each single module is covered with reflective white tape or by black natural tiles. The pedestrian crossing is fixed to the ground by anchors.
H 7 CM RUBBER PEDESTRIAN CROSSING
The pedestrian crossing is made of vulcanize rubber and it is composed of movable modular parts. The product is resistant to the hurts and crushing of the vehicles. On the edge from the side of the vehicles, the pedestrian crossing has elastoplastic yellow inserts. In the central part each single module is covered with reflective white tape or by black natural tiles. The pedestrian crossing is fixed to the ground by anchors.
RUBBER CURBSTONE 5 CM
The curbstone is made of vulcanized rubber, with high elasticity and high resistance to the hurts and crushing of the vehicles. The curbstone is yellow painted to reduce the ageing and increase the resistance against the weathering.To ensure a better visibility during the night, the curbstone are integrated with yellow reflective tape inserts.The lower part has a shape that grant the water flow.
Also available with black colour.
Also available with black colour.
RUBBER CURBSTONE 10 CM
The curbstone is made of vulcanized rubber, with high elasticity and high resistance to the hurts and crushing of the vehicles. The curbstone is yellow painted to reduce the ageing and increase the resistance against the weathering.To ensure a better visibility during the night, the curbstone are integrated with yellow reflective tape inserts.The lower part has a shape that grant the water flow. Also available with black colour.
ROAD MIRROR "ICARO" 50 - 60 - 70 - 80 - 90 CM
The circular mirrors are made of plastic materials treated to ensure high impact resistance, weathering, UV rays and dust.
They have a back body made of orange polipoprilene and a convex reflecting surface at the front (to extend the field of view) made of aluminized acrylic.The mirror at the back, has a galvanized steel bracket for fastening onto poles and/or supports.
They have a back body made of orange polipoprilene and a convex reflecting surface at the front (to extend the field of view) made of aluminized acrylic.The mirror at the back, has a galvanized steel bracket for fastening onto poles and/or supports.
ROAD MIRROR "GIOTTO" 60 - 80 - 100 CM
The circular mirrors are made of plastic materials treated to ensure high impact resistance, weathering, UV rays and dust.
The mirror is made by a front side white case with reflective red inserts along all the edges, and a convex mirror protected by a black rubber gasket.To ensure that the mirror reflecting part snaps into the rear body tightly, the entire edge around the the reflecting part has a rubber gasket kept by high resistant glue.
The mirror is made by a front side white case with reflective red inserts along all the edges, and a convex mirror protected by a black rubber gasket.To ensure that the mirror reflecting part snaps into the rear body tightly, the entire edge around the the reflecting part has a rubber gasket kept by high resistant glue.
INDOOR MIRROR "TOLOMEO" 30-40-50-60-70-90 CM
Interior mirrors are produced with high resi stance to the hurts, against dust and usage materials.The mirrors are composed by a front side: the mirror with convex shape (to be able to extend the control field of view) and made in aluminazed acrylic material: the edges of the mirrors is made with rubber black colour gasket. In the back side the mirrors have a plastic attach that permits the regulation of the joint and the installation on wall and/or in any other flat surface through screws.
SURVEILLANCE MIRROR "MICHELANGELO" 60-70-80-90-100
The surveillance cupole is made of PMMA (polymethyl methacrylate) aluminized resistant and durable. The cupole circumference is provided with a circular ring that facilitates the placement of walls, ceilings, columns and / or other flat supports.
EUROFLASH YELLOW FLASHING LIGHT
The “Euroflash”, two-face LED warning light is composed of a yellow lighting unit and an orange base that holds the batteries.
The light lens is made up of two halves with a diameter of 200 mm; the base contains 2 batteries, the electronic circuit and the on/off switch which can be reached from the outside using the specially supplied wrench; the back has a slide connection for application of the universal securing bracket.
The light lens is made up of two halves with a diameter of 200 mm; the base contains 2 batteries, the electronic circuit and the on/off switch which can be reached from the outside using the specially supplied wrench; the back has a slide connection for application of the universal securing bracket.
EUROFLASH RED STEADY LIGHT
The “Euroflash”, two-face LED warning light is composed of a red lighting unit and an orange base that holds the batteries.The light lens is made up of two halves with a diameter of
200 mm; the base contains 2 batteries, the electronic circuit and the on/off switch which can be reached from the outside using the specially supplied wrench; the back has a
slide connection for application of the universal securing bracket.
200 mm; the base contains 2 batteries, the electronic circuit and the on/off switch which can be reached from the outside using the specially supplied wrench; the back has a
slide connection for application of the universal securing bracket.
ONE YELLOW FLASHING LIGHT
The “One”, two-face LED warning light is composed of a yellow lighting unit and an orange base that holds the battery.
The light lens is made up of two shells with a diameter of 200 mm; the shape permits uniform propagation of the light. The base contains 1 battery, the electronic circuit
and the on/off switch which can be reached from the outside using the specially supplied key; the back has a slide connection for application of the universal securing bracket.
The light lens is made up of two shells with a diameter of 200 mm; the shape permits uniform propagation of the light. The base contains 1 battery, the electronic circuit
and the on/off switch which can be reached from the outside using the specially supplied key; the back has a slide connection for application of the universal securing bracket.
ONE RED STEADY LIGHT
The “One”, two-face LED warning light is composed of a red steady unit and an orange base that holds the batteries.The light lens is made up of two shells with a diameter of 200
mm; the shape permits uniform propagation of the light. The base contains 1 battery, the electronic circuit and the on/off switch which can be reached from the outside using the specially supplied key; the back has a slide
connection for application of the universal securing bracket.
mm; the shape permits uniform propagation of the light. The base contains 1 battery, the electronic circuit and the on/off switch which can be reached from the outside using the specially supplied key; the back has a slide
connection for application of the universal securing bracket.
E-ONE YELLOW FLASHING LIGHT
The E One single face warning light is composed of a yellow lighting units and an orange base that holds the 2 batteries. The luminous optic has an emission surface of 314 cm that makes it visible at long distance. Using a particular Fresnel lens of our design, the uniform brightness is very good in all the luminous emission surface. Thanks to this characteristic E One light has a very
high luminous intensity dispite of one single led with a very low consumption and grant a long lasting of the batteries.
high luminous intensity dispite of one single led with a very low consumption and grant a long lasting of the batteries.
WIRELESS SEQUENTIAL SYSTEM RADIO 230MM
Due to the absence of cables and to the reduced dimensions the installation of the Radio Synchroled is faster than the traditional sequential system. The use of the Radio Synchroled permits to reduce the time of the positioning of the system and the preparation of the work zones. The duration of the synchronization is unlimited.
E-ONE RADIO SYNCHROLED
Radio E-ONE permits to realize a luminous sequence of lights to advice the vehicles about a lane change or deviation.The system can be composed by 2 or more lights lacated
at the maximum distance of 80 mts. The system is very easy to install since it is cableless and with very compact size. The initial synchronization is made throught the activation in sequence of the lights that composed the system, and it is granted till the first switch on light (the MASTER) batteries discharge.
at the maximum distance of 80 mts. The system is very easy to install since it is cableless and with very compact size. The initial synchronization is made throught the activation in sequence of the lights that composed the system, and it is granted till the first switch on light (the MASTER) batteries discharge.
LED OPTIC DIAMETER 100 MM - UNI EN 12352 Class L2H
The flashing LED amber diameter 100 mm, consists of 2 shells (one front - lens, one rear - base) made of plastic "Lexan" transparent particularly resistant to impact and atmospheric agents. The coupling of 2 shells is ensured by constraints interlocking screws and nuts.The electronic board with leds mounted inside the flashing light is bound by appropriate supports and constraints on rotation. The flashlight comes with power supply cable with eyelet terminal for connection to battery.
LED OPTIC DIAMETER 200 MM - UNI EN 12352 Class L8H
The flashing LED amber diameter 200 mm, consists of 2 shells (one front - lens, one rear - base) made of plastic "Lexan" transparent particularly resistant to impact and atmospheric agents.The coupling of 2 shells is ensured by constraints interlocking screws and nuts. The electronic board with leds mounted inside the flashing light is bound by appropriate supports and constraints on rotation. The flashlight comes with power supply cable with eyelet terminal for connection to battery.
LED OPTIC DIAMETER 300 MM - UNI EN 12352 Class L9M
The flashing LED amber diameter 300 mm, consists of 2 shells (one front - lens, one rear - base) made of plastic "Lexan" transparent particularly resistant to impact and atmospheric agents.The coupling of 2 shells is ensured by constraints interlocking screws and nuts. The electronic board with leds mounted inside the flashing light is bound by appropriate supports and constraints on rotation. The flashlight comes with power supply cable with eyelet terminal for connection to battery.
LED MOBILE TRAFFIC LIGHT
The system is composed by two closeable trailers furnished of boxed traffic lights with three 200 mm LEDs lenses. It is recommended to use the mobile traffic light in temporary applications because there are not cables to connect the two trailers together. The system works with two batteries (one for the mobile trailer) of 12 V commercial type for automotive, they are located inside the lockable battery case with the operation check units.The traffic light is provided of two wheels and of a carrying handle.
TRADITIONAL TRAFFIC LIGHT
System consisting of two mobile traffic light carriages. Mobile traffic lights are recommended for use in construction work zones that are continually in motion: the
light-signal units are identical and operate independently i.e. cableless. The system is designed to operate with two commercial-type batteries (one per carriage).
light-signal units are identical and operate independently i.e. cableless. The system is designed to operate with two commercial-type batteries (one per carriage).
3 CM RUBBER SPEED MODERATOR (h3x60x48 CM)
The device is mounted on streets where the speed limit is 50 km/h. It can be installed in all the places where you want to keep a moderate speed.
Modular, elastic and resistant to the crushing, the yellow inserts guarantee high night visibility.
Modular, elastic and resistant to the crushing, the yellow inserts guarantee high night visibility.